A Front Load Washer Without Shipping Bolts

There are various reasons why you'd got to transport your front load washer. Moving houses, rearranging your home’s layout, or removing your washer to form room for a replacement one, require a secure and reliable thanks to moving your appliance. Washer shipping bolts are essential to staying your appliance stable and guarded during transportation. The team at Royal Appliance recommends the subsequent steps to stop problems when moving your machine: Whirlpool Appliance Parts

 Unplug the Appliance
Unplugging your washer before installing bolts helps prevent any safety risks. Removing the plug immediately cuts off power to the machine, preventing electrocution or a possible fire. Pull the machine far away from the wall after unplugging to make sure you'll access the drain lines and water hoses.

Drain the Water
A bucket is going to be needed during this step. Place the bucket behind your machine, ensuring it's large enough to gather any water draining from the appliance. Remove the water hoses from the rear connectors. Place the hoses within the bucket and pull the drain hose gently, allowing the water to fill the bucket. make sure the machine is totally drained before moving to the subsequent step.

Uncover the Shipping Bolt Holes
Carefully move your appliance until you see the rear panel. Uncovering the shipping bolt holes requires access to the present component. you'll notice cabinet plugs covering the shipping bolt holes. Remove these components from each of the four corners on the panel, exposing the world to screw within the bolts.LG refrigerator parts

Insert the Shipping Bolts
Your shipping bolts may are available in two different sizes. Arrange the four bolts consistent with size, eliminating confusion and therefore the possibility for error. Insert the 2 shorter shipping bolts into the 2 openings at the highest of the rear panel. Longer bolts belong within the bottom two openings on the panel. Some washers utilize bolts that are uniform in size. These are universal bolts, meaning they're going to slot in any of the four openings. Use a socket and wrench to tighten your shipping bolts, ensuring they're going to not be jostled loose during transport.

Using washer shipping bolts is a crucial step when safely moving your front load washer. they permit the appliance to be transported with none internal damage. Our team with then step in and do the remainder of the work once your washer has reached its destination. Call us at +315 314 2092 or visit us at Appliance parts and Supplies installation service.